stereopi hats wtf ?

Other hardware discussion
Post Reply
zoldaten
Posts: 41
Joined: Fri Apr 26, 2019 7:07 am

stereopi hats wtf ?

Post by zoldaten »

I was making a case to stereopi and got ready to put on new hat for it -
zero2go omni -http://www.uugear.com/product/zero2go-o ... pberry-pi/
It`s very convinient as one can power pi from different sources, correct shutdown and etc.

But i found out that GPIO header of stereopi is reverced !
stereopi.jpg
stereopi.jpg (117.04 KiB) Viewed 202 times
While the standard GPIO header looks like this -
RPi_tutorial_Pin_diagram.jpg
RPi_tutorial_Pin_diagram.jpg (244.55 KiB) Viewed 202 times
So i couldnt place a hat standard way -
zero2go.jpg
zero2go.jpg (95.27 KiB) Viewed 202 times
I put it reverced ! Facepalm. :shock:

It working but now i can forget about cosy case ((
Pi-hat i connected is sticking out...

stereomaton
Posts: 210
Joined: Tue May 21, 2019 12:33 pm
Location: France

Re: stereopi hats wtf ?

Post by stereomaton »

If the GPIO connector was the way around, the pi-hat would cover the camera connectors.
Since the cameras are primary functions with this board, it is probably better this way.
Stereophotographer and hacker
Despite my quite active participation in the forum, I am not in the StereoPi team
StereoPi (v1) Standard Edition + CM3Lite module + a few cameras

zoldaten
Posts: 41
Joined: Fri Apr 26, 2019 7:07 am

Re: stereopi hats wtf ?

Post by zoldaten »

May be you`re right.
But with this - https://aliexpress.ru/item/1005001451035151.html
it`s easy to solve coverage problem.

User avatar
Realizator
Site Admin
Posts: 680
Joined: Tue Apr 16, 2019 9:23 am
Contact:

Re: stereopi hats wtf ?

Post by Realizator »

@zoldaten JFYI, we fixed the GPIO position in the new board. As for the tall header mentioned - yep, this might be an option.
Eugene a.k.a. Realizator

zoldaten
Posts: 41
Joined: Fri Apr 26, 2019 7:07 am

Re: stereopi hats wtf ?

Post by zoldaten »

Realizator wrote:
Mon Mar 22, 2021 4:18 pm
@zoldaten JFYI, we fixed the GPIO position in the new board. As for the tall header mentioned - yep, this might be an option.
sounds good !

Post Reply