1.44" TFT screen Waveshare

Other hardware discussion
Post Reply
User avatar
Realizator
Site Admin
Posts: 187
Joined: Tue Apr 16, 2019 9:23 am
Contact:

1.44" TFT screen Waveshare

Post by Realizator » Fri Jun 21, 2019 12:51 pm

I've got one of these tiny funny screens
So after following this manual with this fix I got this result:

Image

Looks like new guides are coming :-)
Eugene a.k.a. Realizator

User avatar
stereomii
Posts: 27
Joined: Mon May 13, 2019 3:11 pm
Location: Apeldoorn, The Netherlands
Contact:

Re: 1.44" TFT screen Waveshare

Post by stereomii » Tue Jun 25, 2019 12:30 pm

Realizator wrote:
Fri Jun 21, 2019 12:51 pm
I've got one of these tiny funny screens
.............
Looks like new guides are coming :-)
Looks promising, although I think it will be difficult to package this nicely with my stereopi. Probably requires new case or add it to the outside of existing case with 14 soldered wires ;)
Jan a.k.a. stereomii
StereoPi with Waveshare 160deg cams

User avatar
Realizator
Site Admin
Posts: 187
Joined: Tue Apr 16, 2019 9:23 am
Contact:

Re: 1.44" TFT screen Waveshare

Post by Realizator » Wed Jun 26, 2019 10:52 am

stereomii wrote:
Tue Jun 25, 2019 12:30 pm
Looks promising, although I think it will be difficult to package this nicely with my stereopi. Probably requires new case or add it to the outside of existing case with 14 soldered wires ;)
I'll try to do it solder-less, and will put my solution here. :-)
Eugene a.k.a. Realizator

stereomaton
Posts: 47
Joined: Tue May 21, 2019 12:33 pm
Location: France

Re: 1.44" TFT screen Waveshare

Post by stereomaton » Sat Jun 29, 2019 10:35 am

Realizator wrote:
Wed Jun 26, 2019 10:52 am
I'll try to do it solder-less
Lots of people use this kind of jumper wires for prototyping [first link, not a recommandation]
https://www.amazon.com/MCIGICM-40Pin-Br ... 07PLZC26F/
Stereophotographer and hacker
StereoPi Standard Edition + CM3Lite module

Post Reply