1.44" TFT screen Waveshare

Other hardware discussion
Post Reply
User avatar
Realizator
Site Admin
Posts: 449
Joined: Tue Apr 16, 2019 9:23 am
Contact:

1.44" TFT screen Waveshare

Post by Realizator » Fri Jun 21, 2019 12:51 pm

I've got one of these tiny funny screens
So after following this manual with this fix I got this result:

Image

Looks like new guides are coming :-)
Eugene a.k.a. Realizator

User avatar
stereomii
Posts: 27
Joined: Mon May 13, 2019 3:11 pm
Location: Apeldoorn, The Netherlands
Contact:

Re: 1.44" TFT screen Waveshare

Post by stereomii » Tue Jun 25, 2019 12:30 pm

Realizator wrote:
Fri Jun 21, 2019 12:51 pm
I've got one of these tiny funny screens
.............
Looks like new guides are coming :-)
Looks promising, although I think it will be difficult to package this nicely with my stereopi. Probably requires new case or add it to the outside of existing case with 14 soldered wires ;)
Jan a.k.a. stereomii
StereoPi with Waveshare 160deg cams

User avatar
Realizator
Site Admin
Posts: 449
Joined: Tue Apr 16, 2019 9:23 am
Contact:

Re: 1.44" TFT screen Waveshare

Post by Realizator » Wed Jun 26, 2019 10:52 am

stereomii wrote:
Tue Jun 25, 2019 12:30 pm
Looks promising, although I think it will be difficult to package this nicely with my stereopi. Probably requires new case or add it to the outside of existing case with 14 soldered wires ;)
I'll try to do it solder-less, and will put my solution here. :-)
Eugene a.k.a. Realizator

stereomaton
Posts: 132
Joined: Tue May 21, 2019 12:33 pm
Location: France

Re: 1.44" TFT screen Waveshare

Post by stereomaton » Sat Jun 29, 2019 10:35 am

Realizator wrote:
Wed Jun 26, 2019 10:52 am
I'll try to do it solder-less
Lots of people use this kind of jumper wires for prototyping [first link, not a recommandation]
https://www.amazon.com/MCIGICM-40Pin-Br ... 07PLZC26F/
Stereophotographer and hacker
Despite my quite active participation in the forum, I am not in the StereoPi team
StereoPi Standard Edition + CM3Lite module

MauriceCyril
Posts: 4
Joined: Fri Feb 21, 2020 3:13 am

Re: 1.44" TFT screen Waveshare

Post by MauriceCyril » Fri Feb 21, 2020 3:22 am

Hi everyone, is there an updated guide on how to set this screen up with the stereopi?

User avatar
Realizator
Site Admin
Posts: 449
Joined: Tue Apr 16, 2019 9:23 am
Contact:

Re: 1.44" TFT screen Waveshare

Post by Realizator » Fri Feb 21, 2020 9:00 am

Hi MauriceCyril,
At the very beginning of this post there are two links for the manual with all the steps you need.
Do you have any problems while installing? Which Raspbian image you're using for that?
Eugene a.k.a. Realizator

MauriceCyril
Posts: 4
Joined: Fri Feb 21, 2020 3:13 am

Re: 1.44" TFT screen Waveshare

Post by MauriceCyril » Mon Feb 24, 2020 11:45 pm

Thanks so much will check them out. I thought there was a new consolidated guide that I was missing.

User avatar
Realizator
Site Admin
Posts: 449
Joined: Tue Apr 16, 2019 9:23 am
Contact:

Re: 1.44" TFT screen Waveshare

Post by Realizator » Tue Feb 25, 2020 7:54 am

Hi MauriceCyril,
You see, installation of this screen has no any problems, that's why we did not post any additional guides. The only difficulty I found was incorrect settings in the original guide, so I've posted second link to the RPi forum with the fix.
Eugene a.k.a. Realizator

Post Reply