ROS preinstalled image

Other software discussion
Post Reply
User avatar
zoldaten
Posts: 48
Joined: Fri Apr 26, 2019 7:07 am

ROS preinstalled image

Post by zoldaten »

Подскажите, есть образы с собранным ROS (robot operation system) ?
Do you have any ready-to-use ROS images?

User avatar
Realizator
Site Admin
Posts: 900
Joined: Tue Apr 16, 2019 9:23 am
Contact:

Re: ROS preinstalled image

Post by Realizator »

Готового нет, вот как мы проводили эксперимент с образом от Ubiquity Robotics:
https://github.com/realizator/StereoPi- ... h-map-test

We have no special ROS images, and used ready-to-use images from Ubiquiti Robotics:
https://github.com/realizator/StereoPi- ... h-map-test
Eugene a.k.a. Realizator

User avatar
zoldaten
Posts: 48
Joined: Fri Apr 26, 2019 7:07 am

Re: ROS preinstalled image

Post by zoldaten »

То есть вы просто запустили ноду стереокамер и вещали в сеть на машину с образом ROS ?
So you just started stereocameras node and stream this video over network to the robot?

User avatar
Realizator
Site Admin
Posts: 900
Joined: Tue Apr 16, 2019 9:23 am
Contact:

Re: ROS preinstalled image

Post by Realizator »

zoldaten wrote:
Tue Oct 29, 2019 12:15 pm
То есть вы просто запустили ноду стереокамер и вещали в сеть на машину с образом ROS ?
Нет. ROS был запущен на борту StereoPi, которая стояла на машинке. А картинки брались с камер.
Ноды стереокамер были запущены для того, чтобы скормить поток с камер в ROS штатным способом. Мы пока не сделали родной драйвер для ROS, поэтому применили такое подсмотренное решение.

English:
Nope. ROS has been run on the StereoPi, which is installed on RC car. And StereoPi captures images from the cameras.
We used camera nodes to provide ROS-compatible way to feed video streams from our cameras. As we did not yet created native driver for ROS, we use this solution.
Eugene a.k.a. Realizator

User avatar
Realizator
Site Admin
Posts: 900
Joined: Tue Apr 16, 2019 9:23 am
Contact:

Re: ROS preinstalled image

Post by Realizator »

I've just found new fork or raspicam_node for ROS with the stereoscopic support here: https://github.com/UbiquityRobotics/ras ... -552142081

I plan to test it in a several days. If everything goes well, I can suggest we have "out-of-the-box" StereoPi support in ROS!

p.s. If i'm not mistaken, this fork was done by one of our forum users. Let's wait for some comments here ;)
Eugene a.k.a. Realizator

Post Reply