360 video

OpenCV, Python and other image processing questions
Post Reply
Posts: 13
Joined: Mon Apr 29, 2019 12:52 pm

360 video

Post by Mr-Qu33f »

Has anyone seen this and tried it on the stereopi?

https://www.pyimagesearch.com/2016/01/2 ... th-opencv/

Would love to get 360 video working on mine, I'm away at the moment but will try it when I get home unless you guys think it wouldn't work
Deluxe Stereopi + CM3 lite

Posts: 184
Joined: Tue May 21, 2019 12:33 pm
Location: France

Re: 360 video

Post by stereomaton »

According to https://www.crowdsupply.com/virt2real/s ... and-videos someone started to test 360x180, at least in photo.
I suspect fisheye stitching being a bit heavier than rectilinear camera images, so you possibly would get a lower FPS at same size, but in theory it sounds feasible. You might have a bit things to learn and experiment though.
Stereophotographer and hacker
Despite my quite active participation in the forum, I am not in the StereoPi team
StereoPi Standard Edition + CM3Lite module + a few cameras

Posts: 4
Joined: Wed Apr 24, 2019 6:15 pm

Re: 360 video

Post by Asprit3d »

The ability to record video from each camera stream, and then convert it to 360.

User avatar
Site Admin
Posts: 600
Joined: Tue Apr 16, 2019 9:23 am

Re: 360 video

Post by Realizator »

Asprit3d wrote:
Fri Dec 13, 2019 3:57 pm
The ability to record video from each camera stream, and then convert it to 360.
For the 360 degree video you need a couple of 200 degree cameras, Waveshare 'M' model. We're prefer to use 'G' model (160 degree), but it is not enough FOV for the 360 video.
Eugene a.k.a. Realizator

Post Reply