How to get SPI0 working
Posted: Wed Oct 23, 2019 3:26 pm
Hi!
I'd like to use SPI0 on the StereoPi. I use the standard and latest Raspbian. I enabled SPI with raspi-config and rebooted several times, but ls /dev/spi* doesn't give any result.
Then I enabled SPI1 (added dtoverlay=spi1-3cs to /boot/config.txt), and it seems to be working. (I now have /dev/spidev1.0, /dev/spidev1.1 and /dev/spidev1.2) Pinout is here: https://pinout.xyz/
Did anyone have any luck enabling SPI0?
I'd like to use SPI0 on the StereoPi. I use the standard and latest Raspbian. I enabled SPI with raspi-config and rebooted several times, but ls /dev/spi* doesn't give any result.
Then I enabled SPI1 (added dtoverlay=spi1-3cs to /boot/config.txt), and it seems to be working. (I now have /dev/spidev1.0, /dev/spidev1.1 and /dev/spidev1.2) Pinout is here: https://pinout.xyz/
Did anyone have any luck enabling SPI0?