I was making a case to stereopi and got ready to put on new hat for it -
zero2go omni -http://www.uugear.com/product/zero2go-o ... pberry-pi/
It`s very convinient as one can power pi from different sources, correct shutdown and etc.
But i found out that GPIO header of stereopi is reverced !
While the standard GPIO header looks like this -
So i couldnt place a hat standard way -
I put it reverced ! Facepalm.
It working but now i can forget about cosy case ((
Pi-hat i connected is sticking out...
stereopi hats wtf ?
-
- Posts: 215
- Joined: Tue May 21, 2019 12:33 pm
- Location: France
Re: stereopi hats wtf ?
If the GPIO connector was the way around, the pi-hat would cover the camera connectors.
Since the cameras are primary functions with this board, it is probably better this way.
Since the cameras are primary functions with this board, it is probably better this way.
Stereophotographer and hacker
Despite my quite active participation in the forum, I am not in the StereoPi team
StereoPi (v1) Standard Edition + CM3Lite module + a few cameras
Despite my quite active participation in the forum, I am not in the StereoPi team
StereoPi (v1) Standard Edition + CM3Lite module + a few cameras
Re: stereopi hats wtf ?
May be you`re right.
But with this - https://aliexpress.ru/item/1005001451035151.html
it`s easy to solve coverage problem.
But with this - https://aliexpress.ru/item/1005001451035151.html
it`s easy to solve coverage problem.
- Realizator
- Site Admin
- Posts: 900
- Joined: Tue Apr 16, 2019 9:23 am
- Contact:
Re: stereopi hats wtf ?
@zoldaten JFYI, we fixed the GPIO position in the new board. As for the tall header mentioned - yep, this might be an option.
Eugene a.k.a. Realizator
Re: stereopi hats wtf ?
sounds good !Realizator wrote: ↑Mon Mar 22, 2021 4:18 pm@zoldaten JFYI, we fixed the GPIO position in the new board. As for the tall header mentioned - yep, this might be an option.