I've got one of these tiny funny screens
So after following this manual with this fix I got this result:
Looks like new guides are coming
1.44" TFT screen Waveshare
- Realizator
- Site Admin
- Posts: 900
- Joined: Tue Apr 16, 2019 9:23 am
- Contact:
1.44" TFT screen Waveshare
Eugene a.k.a. Realizator
Re: 1.44" TFT screen Waveshare
Looks promising, although I think it will be difficult to package this nicely with my stereopi. Probably requires new case or add it to the outside of existing case with 14 soldered wiresRealizator wrote: ↑Fri Jun 21, 2019 12:51 pmI've got one of these tiny funny screens
.............
Looks like new guides are coming
Jan a.k.a. stereomii
StereoPi with Waveshare 160deg cams
StereoPi with Waveshare 160deg cams
- Realizator
- Site Admin
- Posts: 900
- Joined: Tue Apr 16, 2019 9:23 am
- Contact:
Re: 1.44" TFT screen Waveshare
I'll try to do it solder-less, and will put my solution here.
Eugene a.k.a. Realizator
-
- Posts: 215
- Joined: Tue May 21, 2019 12:33 pm
- Location: France
Re: 1.44" TFT screen Waveshare
Lots of people use this kind of jumper wires for prototyping [first link, not a recommandation]
https://www.amazon.com/MCIGICM-40Pin-Br ... 07PLZC26F/
Stereophotographer and hacker
Despite my quite active participation in the forum, I am not in the StereoPi team
StereoPi (v1) Standard Edition + CM3Lite module + a few cameras
Despite my quite active participation in the forum, I am not in the StereoPi team
StereoPi (v1) Standard Edition + CM3Lite module + a few cameras
-
- Posts: 4
- Joined: Fri Feb 21, 2020 3:13 am
Re: 1.44" TFT screen Waveshare
Hi everyone, is there an updated guide on how to set this screen up with the stereopi?
- Realizator
- Site Admin
- Posts: 900
- Joined: Tue Apr 16, 2019 9:23 am
- Contact:
Re: 1.44" TFT screen Waveshare
Hi MauriceCyril,
At the very beginning of this post there are two links for the manual with all the steps you need.
Do you have any problems while installing? Which Raspbian image you're using for that?
At the very beginning of this post there are two links for the manual with all the steps you need.
Do you have any problems while installing? Which Raspbian image you're using for that?
Eugene a.k.a. Realizator
-
- Posts: 4
- Joined: Fri Feb 21, 2020 3:13 am
Re: 1.44" TFT screen Waveshare
Thanks so much will check them out. I thought there was a new consolidated guide that I was missing.
- Realizator
- Site Admin
- Posts: 900
- Joined: Tue Apr 16, 2019 9:23 am
- Contact:
Re: 1.44" TFT screen Waveshare
Hi MauriceCyril,
You see, installation of this screen has no any problems, that's why we did not post any additional guides. The only difficulty I found was incorrect settings in the original guide, so I've posted second link to the RPi forum with the fix.
You see, installation of this screen has no any problems, that's why we did not post any additional guides. The only difficulty I found was incorrect settings in the original guide, so I've posted second link to the RPi forum with the fix.
Eugene a.k.a. Realizator