All the outdoor images from my StereoPi V2 are badly washed out.
The ISO, EV, and Exposure settings in SLP2 don't have much affect.
It's a show-stopper.
Indoor shots look fine.
Maybe the cameras don't have enough time to meter the light before making the exposure.
Is there a fix?
SLP2 image over-exposure - StereoPi V2
-
Realizator
- Site Admin
- Posts: 884
- Joined: Tue Apr 16, 2019 9:23 am
- Contact:
Re: SLP2 image over-exposure - StereoPi V2
Hi davidheiserca,
I can't quickly catch the potential issue there. Could you please share one of your photos and your settings?
You can do this right here on the forum, or write me an email to [mynickname]@gmail.com
To share your settings, you can attach the file 'stereopi.conf" from your /boot partition of the micro SD card. Unlike the 'cosmostreamer.conf' with system settings, 'stereopi.conf' contains only photo/video related settings.
I can't quickly catch the potential issue there. Could you please share one of your photos and your settings?
You can do this right here on the forum, or write me an email to [mynickname]@gmail.com
To share your settings, you can attach the file 'stereopi.conf" from your /boot partition of the micro SD card. Unlike the 'cosmostreamer.conf' with system settings, 'stereopi.conf' contains only photo/video related settings.
Eugene a.k.a. Realizator
-
Realizator
- Site Admin
- Posts: 884
- Joined: Tue Apr 16, 2019 9:23 am
- Contact:
Re: SLP2 image over-exposure - StereoPi V2
Dave, as we discussed by email, the "Metering mode" option is fixed now in the latest SLP update.
Eugene a.k.a. Realizator
-
peterfiabigron
- Posts: 13
- Joined: Fri Sep 16, 2022 8:19 am
Re: SLP2 image over-exposure - StereoPi V2
Hi,
Is there any solution to this topic's problem? I have the same problem. It is present with every version of SLP2 when I take outdoor stills. I use HQ cameras. Through viewfinder it is ok, If I change settings (exposure, ISO...) it has effect on viewfinder's preview, but when I shoot the photo the result is a totally washed out picture. Do you have already the solution?
Is there any solution to this topic's problem? I have the same problem. It is present with every version of SLP2 when I take outdoor stills. I use HQ cameras. Through viewfinder it is ok, If I change settings (exposure, ISO...) it has effect on viewfinder's preview, but when I shoot the photo the result is a totally washed out picture. Do you have already the solution?