USB Header pinout?

StereoPi hardware discussion
Post Reply
JustSomeGuyTN
Posts: 10
Joined: Thu Apr 25, 2019 7:53 pm

USB Header pinout?

Post by JustSomeGuyTN » Thu May 23, 2019 1:00 pm

This might be a dumb question but does anyone have diagram for the USB header? What I want to have eventually is to go from the USB header to a USB C plug which I am going to use a SanDisk 500GB portable SSD with.

User avatar
Realizator
Site Admin
Posts: 299
Joined: Tue Apr 16, 2019 9:23 am
Contact:

Re: USB Header pinout?

Post by Realizator » Thu May 23, 2019 1:16 pm

Oops, I need to add it to the Wiki.
You may find pin marked by "1" (near HDMI connector). This is 5v pin.
Opposite pin (near camera CSI-2 connector) is a ground.
So:
1 - 5V (marked by "1", near HDMI connector)
2 - D-
3 - D+
4 - GND (near CSI-2 connector)
Eugene a.k.a. Realizator

User avatar
Realizator
Site Admin
Posts: 299
Joined: Tue Apr 16, 2019 9:23 am
Contact:

Re: USB Header pinout?

Post by Realizator » Mon May 27, 2019 2:21 pm

Just SomeGuyTN, I've updated USB pins and power pins pinout in our Wiki.
Eugene a.k.a. Realizator

Post Reply