Support 2 HQ cameras

StereoPi hardware discussion
Post Reply
Sergey Faschevsky
Posts: 1
Joined: Thu Jan 14, 2021 7:40 am

Support 2 HQ cameras

Post by Sergey Faschevsky »

Добрый день! Поддерживает ли StereoPi две HQ камеры? есть ли возможность запуска камер по внешнему триггеру? HI! do StereoPI work with 2 HQ cameras? How I can get a snapshots via external trigger signal?

stereomaton
Posts: 215
Joined: Tue May 21, 2019 12:33 pm
Location: France

Re: Support 2 HQ cameras

Post by stereomaton »

According to this tweet https://twitter.com/StereoPi/status/1267397816130981888, realizator (from the team of StereoPi) managed to use two HQ cameras.

For the external trigger, this thread viewtopic.php?f=10&t=106 gives a solution that is integrated with the default system.
For lower latency, this article https://stereopi.com/blog/synchronizing ... opi-boards gives in-depth explanation, that you can use with a single board too, but you have to throw out default behavior.
Stereophotographer and hacker
Despite my quite active participation in the forum, I am not in the StereoPi team
StereoPi (v1) Standard Edition + CM3Lite module + a few cameras

User avatar
Realizator
Site Admin
Posts: 900
Joined: Tue Apr 16, 2019 9:23 am
Contact:

Re: Support 2 HQ cameras

Post by Realizator »

Hi Sergey,
I hope Stereomaton answered your question. You can also take a look at his article on an external triggering.
Eugene a.k.a. Realizator

Post Reply