Support 2 HQ cameras
-
- Posts: 1
- Joined: Thu Jan 14, 2021 7:40 am
Support 2 HQ cameras
Добрый день! Поддерживает ли StereoPi две HQ камеры? есть ли возможность запуска камер по внешнему триггеру? HI! do StereoPI work with 2 HQ cameras? How I can get a snapshots via external trigger signal?
-
- Posts: 215
- Joined: Tue May 21, 2019 12:33 pm
- Location: France
Re: Support 2 HQ cameras
According to this tweet https://twitter.com/StereoPi/status/1267397816130981888, realizator (from the team of StereoPi) managed to use two HQ cameras.
For the external trigger, this thread viewtopic.php?f=10&t=106 gives a solution that is integrated with the default system.
For lower latency, this article https://stereopi.com/blog/synchronizing ... opi-boards gives in-depth explanation, that you can use with a single board too, but you have to throw out default behavior.
For the external trigger, this thread viewtopic.php?f=10&t=106 gives a solution that is integrated with the default system.
For lower latency, this article https://stereopi.com/blog/synchronizing ... opi-boards gives in-depth explanation, that you can use with a single board too, but you have to throw out default behavior.
Stereophotographer and hacker
Despite my quite active participation in the forum, I am not in the StereoPi team
StereoPi (v1) Standard Edition + CM3Lite module + a few cameras
Despite my quite active participation in the forum, I am not in the StereoPi team
StereoPi (v1) Standard Edition + CM3Lite module + a few cameras
- Realizator
- Site Admin
- Posts: 900
- Joined: Tue Apr 16, 2019 9:23 am
- Contact:
Re: Support 2 HQ cameras
Hi Sergey,
I hope Stereomaton answered your question. You can also take a look at his article on an external triggering.
I hope Stereomaton answered your question. You can also take a look at his article on an external triggering.
Eugene a.k.a. Realizator