Using two RPi cameras (breakout)
Posted: Sun Sep 20, 2020 6:10 pm
I'm an undergrad student and kinda newbie to RPi, image processing and stuff.
That being said, I'm trying to build a camera module similar from those https://www.amazon.com/Arducam-Camera-A ... D5A5WG0SE1 of Arducam that can support 2 cameras CSI2 output to use stereo vision with 2 RPi v2 cams and the RPi itself.
I took a look on StereoPi but the core and connections looks like a overkill solution to my problem since i'll still have to use a RPi at the end.
I found some sch and papers on parallel data transmission hardware for cameras but almost none on CSI2. Could you guys give me some sources or advice on how to start the sch of the breakout board that I mentioned?
That being said, I'm trying to build a camera module similar from those https://www.amazon.com/Arducam-Camera-A ... D5A5WG0SE1 of Arducam that can support 2 cameras CSI2 output to use stereo vision with 2 RPi v2 cams and the RPi itself.
I took a look on StereoPi but the core and connections looks like a overkill solution to my problem since i'll still have to use a RPi at the end.
I found some sch and papers on parallel data transmission hardware for cameras but almost none on CSI2. Could you guys give me some sources or advice on how to start the sch of the breakout board that I mentioned?