Page 1 of 1

StereoPi AnyCase Kit

Posted: Mon Dec 16, 2019 1:29 pm
by Realizator
We're developed a kit for the very quick case prototyping. You can assemble any case in a 10 minutes using just a screwdriver.
Image
You can find more details here: https://stereopi.com/anycase

We'll upload a drawings to our Wiki in the nearest days.

Re: StereoPi AnyCase Kit

Posted: Fri Mar 06, 2020 9:51 am
by bensailor
Hi,

I have purchased the anycase kit, i have the waveshare RPi I fisheye camera (https://www.waveshare.com/wiki/RPi_Camera_(I))

This camera does not fit with the anycase kit I purchased, even though it states it works for waveshare. Has waveshare updated their camera modules? I am very frustrated as none of the mounting options work.

Re: StereoPi AnyCase Kit

Posted: Fri Mar 06, 2020 12:16 pm
by Realizator
Hi Bensailor,
AnyCase kit was designed for the V1, V2 original cameras and also for Waveshare G and M series.
As I see on the photo, this "I" camera has another wholes position... They have several "basic" PCBs for the cameras, and this one is different. As I can see, it is not compatible neither with a classic RPi cameras V1/V2, nor with the G/M series (supported by AnyCase).