Support plate mounting hardware

Cases, camera mount mechanics, 3D printing, laser cut etc.
Post Reply
ajk
Posts: 1
Joined: Fri May 03, 2019 11:45 pm

Support plate mounting hardware

Post by ajk » Fri May 03, 2019 11:53 pm

Hi,

Should I have gotten nuts and bolts for mounting the cameras to the support plate? I did not get any.

Andy

User avatar
Realizator
Site Admin
Posts: 292
Joined: Tue Apr 16, 2019 9:23 am
Contact:

Re: Support plate mounting hardware

Post by Realizator » Sat May 04, 2019 11:46 am

ajk wrote:
Fri May 03, 2019 11:53 pm
Hi,

Should I have gotten nuts and bolts for mounting the cameras to the support plate? I did not get any.

Andy
Hi Andy,
We did not included nuts and bolts, as each user has his own requirements for setup. We suggested you can choose nuts and bolts according to your setup.
Eugene a.k.a. Realizator

thaytan
Posts: 2
Joined: Wed May 15, 2019 4:55 pm

Re: Support plate mounting hardware

Post by thaytan » Wed May 15, 2019 5:01 pm

Realizator wrote:
Sat May 04, 2019 11:46 am
Hi Andy,
We did not included nuts and bolts, as each user has his own requirements for setup. We suggested you can choose nuts and bolts according to your setup.
That's a slightly bothersome choice. 2.5mm nylon bolts are hard to find near here at less than $1/bolt, and it's going to take a couple of weeks to deliver from China :-/

User avatar
Realizator
Site Admin
Posts: 292
Joined: Tue Apr 16, 2019 9:23 am
Contact:

Re: Support plate mounting hardware

Post by Realizator » Wed May 15, 2019 6:16 pm

thaytan wrote:
Wed May 15, 2019 5:01 pm
Realizator wrote:
Sat May 04, 2019 11:46 am
Hi Andy,
We did not included nuts and bolts, as each user has his own requirements for setup. We suggested you can choose nuts and bolts according to your setup.
That's a slightly bothersome choice. 2.5mm nylon bolts are hard to find near here at less than $1/bolt, and it's going to take a couple of weeks to deliver from China :-/
We used 2 mm, not 2.5 mm. And we use metal bolts, not nylon. They are very cheap, so you can try this approach.
Eugene a.k.a. Realizator

JustSomeGuyTN
Posts: 10
Joined: Thu Apr 25, 2019 7:53 pm

Re: Support plate mounting hardware

Post by JustSomeGuyTN » Thu May 23, 2019 1:09 pm

I bought a set of stand offs from Amazon previously that has some m2 in various lengths. It's a good thing to have around when doing projects.

BarryKER
Posts: 3
Joined: Mon Jul 01, 2019 3:07 am
Location: United Kingdom
Contact:

Support plate mounting hardware

Post by BarryKER » Mon Jul 08, 2019 6:55 am

Its been over a week now and nobody has any suggestions or help for my situation?

User avatar
Realizator
Site Admin
Posts: 292
Joined: Tue Apr 16, 2019 9:23 am
Contact:

Re: Support plate mounting hardware

Post by Realizator » Mon Jul 08, 2019 10:02 am

BarryKER wrote:
Mon Jul 08, 2019 6:55 am
Its been over a week now and nobody has any suggestions or help for my situation?
Sorry BarryKER, but I can not understand your question.
I can not see your question in this thread (Support plate mounting hardware), except this one.
If you are talking about this your question, I will answer here.
Eugene a.k.a. Realizator

Post Reply