StereoPi AnyCase Kit

Cases, camera mount mechanics, 3D printing, laser cut etc.
Post Reply
User avatar
Realizator
Site Admin
Posts: 451
Joined: Tue Apr 16, 2019 9:23 am
Contact:

StereoPi AnyCase Kit

Post by Realizator » Mon Dec 16, 2019 1:29 pm

We're developed a kit for the very quick case prototyping. You can assemble any case in a 10 minutes using just a screwdriver.
Image
You can find more details here: https://stereopi.com/anycase

We'll upload a drawings to our Wiki in the nearest days.
Eugene a.k.a. Realizator

bensailor
Posts: 12
Joined: Thu Mar 05, 2020 9:46 pm

Re: StereoPi AnyCase Kit

Post by bensailor » Fri Mar 06, 2020 9:51 am

Hi,

I have purchased the anycase kit, i have the waveshare RPi I fisheye camera (https://www.waveshare.com/wiki/RPi_Camera_(I))

This camera does not fit with the anycase kit I purchased, even though it states it works for waveshare. Has waveshare updated their camera modules? I am very frustrated as none of the mounting options work.

User avatar
Realizator
Site Admin
Posts: 451
Joined: Tue Apr 16, 2019 9:23 am
Contact:

Re: StereoPi AnyCase Kit

Post by Realizator » Fri Mar 06, 2020 12:16 pm

Hi Bensailor,
AnyCase kit was designed for the V1, V2 original cameras and also for Waveshare G and M series.
As I see on the photo, this "I" camera has another wholes position... They have several "basic" PCBs for the cameras, and this one is different. As I can see, it is not compatible neither with a classic RPi cameras V1/V2, nor with the G/M series (supported by AnyCase).
Eugene a.k.a. Realizator

Post Reply