simple stereo 3d video

Share your projects and ideas with the community!
Post Reply
Asprit3d
Posts: 4
Joined: Wed Apr 24, 2019 6:15 pm

simple stereo 3d video

Post by Asprit3d » Fri Dec 13, 2019 4:09 pm

some stereo video record from rc airplane. i can see in cardboard.
https://www.youtube.com/watch?v=p7vAV4alCs0

https://www.youtube.com/watch?v=CV0udnotB8c

User avatar
Realizator
Site Admin
Posts: 449
Joined: Tue Apr 16, 2019 9:23 am
Contact:

Re: simple stereo 3d video

Post by Realizator » Mon Dec 16, 2019 8:30 am

Wow. cool!
What is the stereobase of your setup?
Eugene a.k.a. Realizator

Asprit3d
Posts: 4
Joined: Wed Apr 24, 2019 6:15 pm

Re: simple stereo 3d video

Post by Asprit3d » Tue Dec 17, 2019 4:58 pm

winter video - 60
summer video - 200

stereomaton
Posts: 132
Joined: Tue May 21, 2019 12:33 pm
Location: France

Re: simple stereo 3d video

Post by stereomaton » Thu Dec 26, 2019 7:13 pm

Nice.

Interestingly, the artifacts created by the combination of roller-shutter and drone vibrations are in very good sync, but the physical alignment of the cameras is far from perfect.
I opened the video in a sView (the 3D video player part) which has the advantage of being able to adjust the vertical alignment on-the-fly and it is far better to watch. I think you can have a more pleasing experience by adjusting the cameras' position.
Also, at the height of such flight, the bigger stereobase you can get will give you the better 3D. Do not be afraid to augment it if you can, you have a big margin before it is too large. Even with 200mm, the 3D effect is quite low.
Stereophotographer and hacker
Despite my quite active participation in the forum, I am not in the StereoPi team
StereoPi Standard Edition + CM3Lite module

User avatar
Realizator
Site Admin
Posts: 449
Joined: Tue Apr 16, 2019 9:23 am
Contact:

Re: simple stereo 3d video

Post by Realizator » Thu Jan 02, 2020 4:00 pm

Hmmm, we definitely need to pay more attention to 3D video post-processing, like we did it for the photo. I've added this new article idea to our to-do list.
Eugene a.k.a. Realizator

Post Reply