Not working cameras
Posted: Sun Jul 28, 2019 8:58 am
Hello to everyone.
Initially, everything worked well. But after a two-month break in development, today I launched StereoPi and did not receive from HDMI image. Only the first camera's LED is on, both cameras are workable. An attempt to see the image through the application on the phone was a failure. I thought that the problem would be solved by loading a fresh SLP image (0.2.3), but the problem remained. I can connect via ssh, local IP, but there is no image. With the commands "raspistill -cs 0" and "raspistill -cs 1" nothing happens, the programs hang, I have to interrupt them. I suspect that this is a software problem, please tell me, in what configuration files I should see the initialization of the cameras?
Initially, everything worked well. But after a two-month break in development, today I launched StereoPi and did not receive from HDMI image. Only the first camera's LED is on, both cameras are workable. An attempt to see the image through the application on the phone was a failure. I thought that the problem would be solved by loading a fresh SLP image (0.2.3), but the problem remained. I can connect via ssh, local IP, but there is no image. With the commands "raspistill -cs 0" and "raspistill -cs 1" nothing happens, the programs hang, I have to interrupt them. I suspect that this is a software problem, please tell me, in what configuration files I should see the initialization of the cameras?