Load camera (V1) parameters from a JSON file

S.L.P. image questions, stereoscopic video livestream and recording, stereoscopic photo capture etc.
Post Reply
shaid
Posts: 2
Joined: Mon Dec 13, 2021 2:58 pm

Load camera (V1) parameters from a JSON file

Post by shaid »

Hi,

Is there a way to configure via picamera each camera (left / right) with different parameters and save the data in a JSON file to be used at startup?

Good Day

Shai Dorot

User avatar
Realizator
Site Admin
Posts: 900
Joined: Tue Apr 16, 2019 9:23 am
Contact:

Re: Load camera (V1) parameters from a JSON file

Post by Realizator »

Hello Shai,

At the startup, cameras are not turned on at all. You can set the parameters you need in the software you are using.

Also, if you are using the stereoscopic mode, you can't set different parameters for cameras - they are automatically synchronized. But for the independent use of each camera you can set any parameters you need.
Eugene a.k.a. Realizator

Post Reply