Search found 9 matches

by xanatos
Fri Feb 26, 2021 5:15 pm
Forum: StereoPi hardware
Topic: StereoPi v2
Replies: 20
Views: 37189

Re: StereoPi v2

Dave, we'll post an official update on this later, but you can download 3D STEP model for the StereoPi v2 right now: ... Thanks. Looks like 40x100mm - 10mm wider than V1. This will present me with some challenges to fit these into the existing robot skulls - will need to do some figuring. Thanks fo...
by xanatos
Fri Feb 26, 2021 3:34 pm
Forum: StereoPi hardware
Topic: StereoPi v2
Replies: 20
Views: 37189

Re: StereoPi v2

Realizator wrote:
Fri Feb 26, 2021 1:11 pm
Hi Dave,
I'll post STEP files soon, so you can get exact size data!
Thanks, that will be helpful. I need to squeeze these into the same space that the V1 units are in.

Dave
by xanatos
Thu Feb 25, 2021 1:05 am
Forum: StereoPi hardware
Topic: StereoPi v2
Replies: 20
Views: 37189

Re: StereoPi v2

Hello & Congratulations on getting V2 Live! I'm having a little bit of trouble finding the board dimensions of the V2. V1 was 40 x 90 mm - were you able to preserve that footprint, and possibly the mounting hole locations??? Thanks very much & best of luck for another hugely successful run! Dave Xan...
by xanatos
Thu Apr 09, 2020 7:59 pm
Forum: StereoPi hardware
Topic: USB Jack Contact failure?
Replies: 2
Views: 2915

Re: USB Jack Contact failure?

Thank you for your most generous offer! I have replied to the email you sent.

Very much appreciated!

Stay Healthy!

Dave
by xanatos
Thu Apr 09, 2020 7:30 pm
Forum: StereoPi hardware
Topic: USB Jack Contact failure?
Replies: 2
Views: 2915

USB Jack Contact failure?

Anybody had any issues with a USB Jack's contact catching and crushing against the back of the jack? Pic on Imgur here: http://imgur.com/gallery/LqnswHI Repairs possible without reflow ovens & such, or? I bought three of these (and two of the slim) - this is the only one that failed in this manner. ...
by xanatos
Mon May 13, 2019 10:40 pm
Forum: Other hardware
Topic: Google Coral Installation with Compute Modules
Replies: 1
Views: 11068

Google Coral Installation with Compute Modules

If you're planning to install Google's Coral Accelerator with EdgeTPU support, you will need to edit the install.sh file that is ready after you download and untar the tarball. The install.sh script checks cat /sys/firmware/devicetree/base/model and compares that string to the stored strings. The Co...
by xanatos
Mon May 13, 2019 10:56 am
Forum: StereoPi hardware
Topic: Voltage changes, CM1 vs. CM3+
Replies: 2
Views: 2936

Re: Voltage changes, CM1 vs. CM3+

That's great, very happy to hear I haven't fried my CM3+. Appreciate your fast response as well! Looking forward to my next window of opportunity to upload to eMMC and try again. Thanks!
by xanatos
Sun May 12, 2019 11:14 pm
Forum: StereoPi hardware
Topic: Voltage changes, CM1 vs. CM3+
Replies: 2
Views: 2936

Voltage changes, CM1 vs. CM3+

Very confused on this wording: On the DIY Ninjas page at https://wiki.stereopi.com/index.php?title=DIY_Ninjas_Section The power jumper info states the following (emphasis mine): Compute Module 1 needs 5V power for VBAT, and CM3/CM3+ needs 3.3V VBAT. By default StereoPi is tuned to provide 5V voltage...
by xanatos
Sun May 12, 2019 11:04 pm
Forum: Other topics
Topic: Bad link on website, goes to "forum.stereosi.com"
Replies: 1
Views: 10395

Bad link on website, goes to "forum.stereosi.com"

Just a quickie: On the main page at https://wiki.stereopi.com/index.php?title=Main_Page The link to the Project forum shows: forum.stereopi.com But it actually takes you to the wrong URL, forum.stereosi.com - which is currently a 404 but if someone buys it... who knows. Might save a few folks some e...