Search found 900 matches

by Realizator
Sat Apr 29, 2023 2:55 pm
Forum: StereoPi v2 hardware
Topic: Compatibility with NOIR wide v3
Replies: 3
Views: 6872

Re: Compatibility with NOIR wide v3

Hi wywarren,

You are right. All V3 cameras need libcamera-based approach, but our SLP2 is built on older MMAL subsystem. We are working on the newer version now.

As for the "green sticker OS" - it's SLP2, and you can find some more details on it in our Wiki.
by Realizator
Sat Apr 29, 2023 2:51 pm
Forum: SLP2 RaspiOS image
Topic: SLP2 image not working. Any suggestions?
Replies: 1
Views: 47707

Re: SLP2 image not working. Any suggestions?

Hi bwegge,

Your issue looks similar to [urlhttps://forum.stereopi.com/viewtopic.php?f=20&t=1335&p=3366#p3366]this one[/url].


I'm trying to emulate this to reproduce this error.

Could you please run this command and share the result with us:

Code: Select all

cat /proc/cpuinfo
by Realizator
Sat Apr 29, 2023 2:44 pm
Forum: Other topics
Topic: Camera overlay
Replies: 1
Views: 48134

Re: Camera overlay

Arcturus you can capture two independent streams, one for each camera. After that, you can use GStreamer or another software to overlay one video frame on another. Since CM4 computational power and GPU is limited, you should optimize these part to get the result you need.
by Realizator
Sat Apr 29, 2023 2:40 pm
Forum: Other software
Topic: StereoPi v2 with Radxa CM3
Replies: 1
Views: 43666

Re: StereoPi v2 with Radxa CM3

Hi Aur20,

The link to dt-blob.bin is sitting on the main Wiki page and named "dt-blob.bin for the CM3 and CM4". You can decompile it to see the DTS file.
by Realizator
Wed Apr 12, 2023 10:04 pm
Forum: Cameras and video capture modules
Topic: SLP2 image over-exposure - StereoPi V2
Replies: 5
Views: 52848

Re: SLP2 image over-exposure - StereoPi V2

Hi peterfiabigron,

Are you using SLP2? Please share an example of the issue; I'll try to reproduce it and find the solution.

The last fix was done a lot of time ago, and as a result, Raspberry Pi Foundation made some fixes in their firmware to eliminate this. We may have a new issue here.
by Realizator
Wed Apr 12, 2023 9:57 pm
Forum: Video, photo (livestream, recording, photo capturing)
Topic: Camera detected/supported 2, still no image
Replies: 1
Views: 48952

Re: Camera detected/supported 2, still no image

Hi Hansi, It looks like you have a connection issue. If some ribbon cable lines are not connected, both cameras can still be detected (since they are using just a few lines for this), but the full data exchange (for image or video transfer) is impossible. At first I'd recommend you to check which ca...
by Realizator
Wed Apr 12, 2023 9:50 pm
Forum: SLP2 RaspiOS image
Topic: "Connection Failed" in browser - Camera-view ok in monitor
Replies: 3
Views: 12863

Re: "Connection Failed" in browser - Camera-view ok in monitor

Stereopi1 wrote:
Fri Feb 03, 2023 12:09 pm
Hi,

Having a similar issue to this, after updating to latest firmware through SLP2 I can no longer access it in browser. Camera still streaming fine to monitor.
Which SLP2 version do you have?
by Realizator
Wed Apr 12, 2023 9:47 pm
Forum: Cameras and video capture modules
Topic: HDMI output to Oculus DK2
Replies: 1
Views: 6270

Re: HDMI output to Oculus DK2

Hi iPutBack, I have no DK2 nearby to test, so I can't confirm the settings. Did you happen to try to test this config using regular Raspberry Pi 4? (Pi3 is not good, but RPi4 has the same CPU as CM4). ENOSPC means insufficient video memory; you can try to increase GPU MEM in config.txt Also, did you...
by Realizator
Wed Apr 12, 2023 8:50 pm
Forum: Video, photo (livestream, recording, photo capturing)
Topic: Video playback? speed problems
Replies: 10
Views: 21249

Re: Video playback? speed problems

Gábor thank you very much for this catch!

As for V3 - we are working on this. It's not that simple, since V3 camera is not supported by MMAL video subsystem we are using in SLP. It requires new libcamera-based video stack, which has no stereoscopic out of the box...
by Realizator
Wed Apr 12, 2023 8:15 pm
Forum: Cameras and video capture modules
Topic: Raspberry camera modul 3 with autofocus
Replies: 4
Views: 16054

Re: Raspberry camera modul 3 with autofocus

V3 camera is supported by the new video stack (libcamera), and is not supported by old (MMAL) stack used in SLP2. It means you can use V3 with Python (new OpenCV image coming soon), but SLP update will take a long time. Old stack was optimized for stereoscopic capture and has a lot of other good stu...
by Realizator
Wed Apr 12, 2023 8:05 pm
Forum: Your Project
Topic: Blinky Box
Replies: 18
Views: 190540

Re: Blinky Box

Hey Blinky,

Congratulations! :-)

And than you for your support and good words!
by Realizator
Wed Apr 12, 2023 8:04 pm
Forum: StereoPi v2 hardware
Topic: PCB stackup detail for StereoPi v2
Replies: 1
Views: 6780

Re: PCB stackup detail for StereoPi v2

Hi maes, We used NexPCB company (https://www.nexpcb.com) and they did both PCB and assembly for us. Here are the data you've asked about: 1 – L1_Top 2 – L2_Signal 3 – L3_VCC 4 – L4_GND 5 – L5_Signal 6 – L6_Bottom L1. L1_Top ---------------------------------- 0.018 mm 0.150mm L2. L2_Signal ----------...
by Realizator
Wed Apr 12, 2023 7:57 pm
Forum: Video, photo (livestream, recording, photo capturing)
Topic: Remote broadcast to VR
Replies: 1
Views: 6290

Re: Remote broadcast to VR

We've solved this by email already :-)
by Realizator
Wed Apr 12, 2023 7:55 pm
Forum: SLP2 RaspiOS image
Topic: SLP2 and CM4
Replies: 1
Views: 6338

Re: SLP2 and CM4

Hi Guillaume,

Uh... I had never faced an issue like this. I'll try to find CM4108032 to test this. It looks like 8Gb has some specific EEPROM, which requires kernel update in SLP.
by Realizator
Wed Apr 12, 2023 7:38 pm
Forum: Cameras and video capture modules
Topic: HQ camera video resolution
Replies: 5
Views: 14510

Re: HQ camera video resolution

Hi Realizator, Would I be able to use method 3 then to obtain 2 separate, 1920x1080 video feeds at 30fps? I need to use 2 separate video files in another application and have been stumped on how to get simultaneous 1080p video feeds. If this is possible, I know that it is possible to connect 2 ster...
by Realizator
Wed Apr 12, 2023 7:32 pm
Forum: Cameras and video capture modules
Topic: camera angle question
Replies: 1
Views: 6101

Re: camera angle question

Yes, but there are better options. You see, each sensor has a 4x3 side ratio. By rotating it, you'll have 3x4, i.e., your image will be narrower, and image width is more important for the depth map than its height. You can rotate each image 90 degrees after cutting the stereoscopic pair. This requir...
by Realizator
Mon Oct 17, 2022 10:15 am
Forum: StereoPi v2 hardware
Topic: CM4lite modul doesn't boot.
Replies: 12
Views: 22414

Re: CM4lite modul doesn't boot.

Hi RainerMohrlok,

I'm glad you were able to localize the issue! I've answered your email - please take a look.
by Realizator
Mon Oct 17, 2022 9:46 am
Forum: SLP2 RaspiOS image
Topic: New to steropi and it wont load up
Replies: 1
Views: 9810

Re: New to steropi and it wont load up

Hello mccltd,

You can take a look at the Wiki main page.

And here is a direct link to the images for the StereoPi V2
by Realizator
Mon Oct 17, 2022 9:44 am
Forum: SLP2 RaspiOS image
Topic: SD card not detected
Replies: 1
Views: 8580

Re: SD card not detected

Hi, angelyn.mercado, Well, I'm a bit confused by this information. Technically StereoPi can manage this card size (like the regular Raspberry Pi), but I've never checked this by myself. I'll buy a 128Gb card and test how it works. You can use one of the included micro SD cards to image them by the i...
by Realizator
Mon Oct 17, 2022 9:29 am
Forum: OpenCV, Python and other image processing
Topic: Libcamera Dual Cam Support
Replies: 1
Views: 9063

Re: Libcamera Dual Cam Support

Wow, this post looks interesting! Thank you for sharing!