Search found 15 matches

by dnaman
Wed Jan 12, 2022 10:38 pm
Forum: StereoPi v2 hardware
Topic: V2 HQ Housing Assembly Focus issue
Replies: 10
Views: 1839

Re: V2 HQ Housing Assembly Focus issue

Eugene, every time I look at those pictures (and my 6mm lenses do the same thing of course) it seems totally wrong to me to have to unscrew the lens like that simply to achieve the infinity position (and farther still to focus on anything closer). On mine, it looked like it was open about 5mm so I t...
by dnaman
Tue Jan 04, 2022 10:51 pm
Forum: StereoPi v2 hardware
Topic: How to connect via WiFi
Replies: 16
Views: 1257

Re: How to connect via WiFi

... but if it's not setup in the router too, doesn't that mean that if the Stereopi is switched off, the router could allocate that ip to something else causing difficulties when the Stereopi is finally connected? In any event, my question was specifically about the ethernet setup and whether it sho...
by dnaman
Thu Dec 30, 2021 7:26 pm
Forum: StereoPi v2 hardware
Topic: How to connect via WiFi
Replies: 16
Views: 1257

Re: How to connect via WiFi

srathinagiri - To set up static ip on my system, I connected via ethernet. Then checked the router for device status and identified the stereopi. That gave me the mac address. I then used that to set up a static ip in the router. Still on ethernet, I went to Device-Settings in the Stereopi screen an...
by dnaman
Wed Dec 29, 2021 1:30 am
Forum: StereoPi v2 hardware
Topic: How to connect via WiFi
Replies: 16
Views: 1257

Re: How to connect via WiFi

Realizator, I'm in Canada which, AFAIK, uses the same country settings as the US .... which is the StereoPi2 default isn't it? In any event, I have solved the immediate problem: On my LAN, I have two wireless access points. I tried the alternative access point and the SP2 happily connects to it. Dun...
by dnaman
Sat Dec 25, 2021 8:23 pm
Forum: StereoPi v2 hardware
Topic: How to connect via WiFi
Replies: 16
Views: 1257

Re: How to connect via WiFi

This thread seems to have dead-ended but I'm having a somewhat similar problem. I can connect fine when using an ethernet cable. I have set up a static IP in both the StereoPi2 and my router and can connect using that IP. However, when I remove the ethernet cable and reboot, I can no longer connect ...
by dnaman
Mon Nov 08, 2021 5:26 pm
Forum: StereoPi v2 hardware
Topic: SP2 HQ Housing Assembly IR Filter Assembly
Replies: 5
Views: 716

Re: SP2 HQ Housing Assembly IR Filter Assembly

Thanks, Realizator, I think if you just mention the (US) glue that you used, people could make their own local match.
by dnaman
Sat Nov 06, 2021 7:06 pm
Forum: StereoPi v2 hardware
Topic: SP2 HQ Housing Assembly IR Filter Assembly
Replies: 5
Views: 716

Re: SP2 HQ Housing Assembly IR Filter Assembly

In the absence of any help, I went ahead and used some LePage "Ultra Gel" Super Glue which seems to have worked quite well. The built-in applicator with this allows you to accurately place a small drop without the use of a toothpick and it worked quite well for me. It may help to use a pair of round...
by dnaman
Sat Nov 06, 2021 6:57 pm
Forum: StereoPi v2 hardware
Topic: ir filter.. protective film?
Replies: 7
Views: 720

Re: ir filter.. protective film?

I too noticed what looked like a protective film on my filters. It's my belief though that what we're seeing may be a chemical film picked up from the plastic bags they were packed in .... most likely a release agent (silicone?) used in the manufacture of the bags. Certainly, my filters were clingin...
by dnaman
Wed Nov 03, 2021 9:07 pm
Forum: StereoPi v2 hardware
Topic: SP2 HQ Housing Assembly IR Filter Assembly
Replies: 5
Views: 716

Re: SP2 HQ Housing Assembly IR Filter Assembly

Any response? I'm referring to the glue needed to install the IR filters in the black carriages. The assembly notes say: "Note: please do not use the cyanoacrylate "one-second" glue! Its condensed vapors can leave traces on the filter. Also, it is too liquid and can stain the filter. The best glue t...
by dnaman
Tue Nov 02, 2021 4:07 pm
Forum: StereoPi v2 hardware
Topic: SP2 HQ Housing Assembly IR Filter Assembly
Replies: 5
Views: 716

SP2 HQ Housing Assembly IR Filter Assembly

Can you be more specific for the type of glue recommended?

"Henkel Pattex" covers a wide range of product from that manufacturer and if you're not familiar with them ....
by dnaman
Thu Oct 21, 2021 9:33 pm
Forum: Other hardware
Topic: V2 kit assembly questions
Replies: 8
Views: 1594

Re: V2 kit assembly questions

The H and V flips didn't help utimately .... I hadn't noticed the rotate. For checking which camera is where, I just put one of the lens caps on and worked with one side .... less confusing. I have I believe fixed the problem by rotating the tft .... see my post in the https://forum.stereopi.com/vie...
by dnaman
Thu Oct 21, 2021 9:27 pm
Forum: Cameras and video capture modules
Topic: Image Upside-down in SLP2
Replies: 5
Views: 725

Re: Image Upside-down in SLP2

The rotation thing at https://youtu.be/PPkERBPHNAg didn't worked for me (it changed things around but still didn't fix it). For reference, my assembly looks like the one shown in Stereopi-v2-camera-kit-13-5.jpg and Stereopi-v2-camera-kit-13-5.jpg of the "StereoPi V2 Camera Kit Guide". Mechanically f...
by dnaman
Tue Oct 19, 2021 9:16 pm
Forum: Other hardware
Topic: V2 kit assembly questions
Replies: 8
Views: 1594

Re: V2 kit assembly questions

Thanks Eugene/Realizator.

I did wonder about flipping the screen or lens plate but wasn't sure that would end up with the left camera-image on the left side of the screen and vice-versa. Nice to have it confirmed that it works!
by dnaman
Tue Oct 19, 2021 12:39 am
Forum: Other hardware
Topic: V2 kit assembly questions
Replies: 8
Views: 1594

Re: V2 kit assembly questions

I believe I figured out the answer to my first question. The numbers in the drop down box refer (I believe) to the GPIO pin used for the connection. Duh!
by dnaman
Mon Oct 18, 2021 12:54 am
Forum: Other hardware
Topic: V2 kit assembly questions
Replies: 8
Views: 1594

Re: V2 kit assembly questions

.... but note that my copy of the StereoPi V2 Quickstart guide claims that SLP2 is marked with a Red sticker and OpenCV with a green one. Realizator's version is correct but be warned. Couple more questions: - When setting up the push-button for the still camera with "Use GPIO as button for Photo Sh...