Hello everyone,
I have a memory card that installed ubuntu mate and ros.
I can use them with any raspberry pi. But when I connect the stereo pi, it doesn't see the cameras.
Is there a file like "dt-blob.bin" for ubuntu mate users?
Thanks in advance.
Stereo Pi and Ubuntu Mate.
- Realizator
- Site Admin
- Posts: 900
- Joined: Tue Apr 16, 2019 9:23 am
- Contact:
Re: Stereo Pi and Ubuntu Mate.
Hi Megli,
As I understand, Ubuntu Mate has some Rsapbian-specific support under the hood, including device tree (look at this thread).
Please try to put our dt-blob.bin in your boot partition and test it again. Please unzip it before use.
Eugene a.k.a. Realizator
Re: Stereo Pi and Ubuntu Mate.
Hi Realizator,
I already put dt-blob.bin in the boot directory. But it didn't help.
There is another file named dt-blob.dst. Do you know anything about this ?
I already put dt-blob.bin in the boot directory. But it didn't help.
There is another file named dt-blob.dst. Do you know anything about this ?
- Realizator
- Site Admin
- Posts: 900
- Joined: Tue Apr 16, 2019 9:23 am
- Contact:
Re: Stereo Pi and Ubuntu Mate.
Megil, dt-blob.dts is a source file for the dt-blob.bin We compiled BIN from DTS.
You can find both here in our Wiki: https://wiki.stereopi.com/index.php?tit ... lob.bin.29
Eugene a.k.a. Realizator
Re: Stereo Pi and Ubuntu Mate.
Thanks for answers.
I solved this problem.
The operating system on my memory card has two parts.
The first is "system-boot", the second is "writable".
I located "dt-blob.bin" file "/writable/boot".
But you have to locate it into the "system-boot" partition.
I'd appreciate it if you'd add it to the wiki.
I solved this problem.
The operating system on my memory card has two parts.
The first is "system-boot", the second is "writable".
I located "dt-blob.bin" file "/writable/boot".
But you have to locate it into the "system-boot" partition.
I'd appreciate it if you'd add it to the wiki.