For reference the gstreamer command I'm using is
Code: Select all
gst-launch-1.0 -v udpsrc port=3000 buffer-size=300000 ! h264parse ! avdec_h264 ! autovideosink sync=false
Code: Select all
gst-launch-1.0 -v udpsrc port=3000 buffer-size=300000 ! h264parse ! avdec_h264 ! autovideosink sync=false
Code: Select all
vcgencmd get_camera
I'm quite late but what kind of special edition of dt-blob is needed for the wide angle V2 cameras and where can I find it? I used the one for CM3/CM4 from here https://wiki.stereopi.com/files/dt-blob.bin.zip but while I get "supported=2 detected=2" when I enter vcgencmd get_camera, raspistill crashes with the widely known ENOSPC error:Realizator wrote: ↑Tue Feb 18, 2020 7:38 am[...]
Another point - you can use a special edition of wide angle V2 cameras from Soho Enterprise, like these:
In this case you need a special edition of dt-blob for these cameras to work.
[...]
Code: Select all
mmal: mmal_vc_component_enable: failed to enable component: ENOSPC
mmal: camera component couldn't be enabled
mmal: main: Failed to create camera component
mmal: Failed to run camera app. Please check for firmware updates
Hi Eugene!Realizator wrote: ↑Thu Sep 08, 2022 9:00 amTaki, could yoiu please define which model of the camera you are using?
The photo you've quoted has SE-SB01 cameras from Soho Enterprise (one of early prototypes), and needs a special dt-blob.bin
I will be pleased to help you with dt-blob after getting your camera model info